Hardwood plywood has a face and core made from broadleaf hardwood veneers, and for visible work in West Bengal homes the face is what counts: its grain, colour and thickness decide how the finished furniture looks. Naimish Plytech Pvt. Ltd. manufactures plywood, block board, waterproof plywood, shuttering plywood and flush doors, and buyers in West Bengal can contact our team for samples and quotes. This page explains how to read a hardwood face when comparing hardwood plywood manufacturers in West Bengal.
Bengal has a long tradition of good timber furniture, with teak and sal familiar names in many homes. Buyers carry that eye over to plywood and quite rightly look at the face first.
The hardwood face is a thin layer. If it is too thin, a carpenter can sand through it while preparing the surface, exposing the lighter or rougher veneer underneath. Ask for the face veneer thickness, and have a sample sanded and polished to see how the face behaves before you order for the whole job.
A supplier who answers these plainly is usually a supplier who knows their product.
Hardwood plywood suits wall panelling and wardrobes in flats because it comes in large, flat sheets that cover wide areas without joints. Pair it with the right grade, BWR or BWP for kitchens and bathrooms, and seal every cut edge. For exposed edges and frames, many designers add a thin strip of solid hardwood.
We manufacture at A 18, A 19, Industrial Area Phase-2, UPSIDC, Sandila (Hardoi), with a corporate office in Lucknow. In our block board the face and core are gurjan, a hardwood, treated for termite and boiling-water resistance, set around New Zealand pine fillers in a pine wood frame.
See our plywood, block board, waterproof plywood and flush doors pages, or open the catalogue. Tell us your city, board type and the finish you plan on the contact page, and our team will confirm the species, grade and thickness available for your project. For the basics of the term, read our page on hardwood plywood manufacturers in UP, and to compare suppliers see the best plywood manufacturers in West Bengal guide.
A clear, evenly coloured hardwood face suits polish and PU, because the grain shows through. If the face will be covered with laminate, an even, smooth surface matters more than the grain pattern.
It varies by product and manufacturer. Ask for the face veneer thickness, because a very thin face can sand through during finishing and show the layer beneath.
It can be if the supplier can give consecutive sheets from the same batch. Ask early, view the sheets in daylight, and lay them out together before cutting.
Call +91 98970 59562, email Info@naimishply.com or use the contact page with your city, board type and finish, and the team will confirm the species, grade and thickness available. The team works Sunday to Friday, 9 am to 8 pm.